Samsung MIM-E03CN Installation And Maintenance Manual page 10

Setting up the controller and the time.
1. Press the gear button, bottom right. Press v, then > option,
press OK
2. User Mode, press OK
3. Wired remote controller, press ok
4. LED > to on
5. Button Mute > on
6. Current time >
7. Date > OK
8. Adjust day with ^ and v, press > adjust the Month with ^
and v, press > adjust Year adjust with ^ and v press, ok.
9. Go to Time
10. Adjust hour with ^ and v, press > adjust the mins with ^ and
v, press ok.
11. To get back to the normal screen press return 5 times
The cylinder timer and field settings will already be set up for you.
Cylinder Timer, if you are heating a hot water cylinder
To avoid the cylinder heating being switched off accidentally we normally add 2 on timers a day, one
at 3-00 am and one at 15-00 pm. This stops nuisance tripping, resets the unit after power cuts and
insures the cylinder is hot 24 hours a day. We don't normally set any off times.
To set the cylinder up as above:
1. From the front screen press the gear button, scroll right > to schedule, press ok.
2. If any timers are showing highlight them and select delete. When no timers are shown we can
add some new ones.
3. Highlight + add schedule, press ok
4. Highlight daily schedule, press ok
5. Type - quiet will show, press v to DHW, do not use quiet
6. Press > press ^ to set to Standard, press >, adjust hour to 3, am press ok
7. Scroll up ^ to + add a timer
8. Highlight + add schedule, press ok
9. Highlight daily schedule, press ok
10. Type quiet will show, press v to DHW, do not use quiet
11. Press > press ^ to set to Standard, press >, adjust hour to 3, pm press ok
Now turn to page 20 to start and test the unit
Heating & Hot Water, Pre-Plumbed
Installation