Miele H 2265-1 BP Operating And Installation Instructions page 71

Problem
The browning of baked
goods is uneven.
The FlexiClip telescopic
runners do not push in
or pull out smoothly.
There is still soiling in
the oven compartment
after a pyrolytic
cleaning programme.
The door will not open
after the Pyrolytic
cleaning programme.
Possible cause and remedy
The wrong temperature or shelf level was selected.
 There will always be a slight unevenness in
browning. If browning is very uneven, check
whether the correct temperature and shelf level
were selected.
The material or colour of the baking tin is not suitable
for the oven function.
 When using the
light coloured, shiny tins are not as suitable. Dark,
matte tins are best for baking.
The bearings in the FlexiClip telescopic runners are
not sufficiently lubricated.
 Lubricate the bearings with the special Miele
lubricant.
Only the special Miele lubricant is designed to
withstand the high temperatures in the oven
compartment. Other lubricants may harden and
stick to the FlexiClip telescopic runners when they
are heated. You can obtain the special Miele
lubricant from your Miele dealer or from Miele.
The pyrolytic cleaning programme burns off soiling in
the oven and leaves it as ash.
 Remove the ash using a damp microfibre cloth or a
clean sponge and a solution of hot water and
washing-up liquid.
If there is still coarse soiling left in the oven after the
pyrolytic cleaning programme, you should start the
programme again, selecting a higher level if
necessary.
The door lock for pyrolytic cleaning does not open.
 Turn the function selector to 0.
 If the door lock still does not release itself, call
Miele.
Problem solving guide
Conventional Heat  function,
71