Chapter 7
Changing the Machine Settings
Changing the Settings
This section describes the procedure to change the settings on <DEVICE SETTINGS>, taking the
steps to specify <EXTENDED AMOUNT> as an example.
1
Press [ON/OFF] to turn on the machine.
See
"Turning on the Machine" on page
2
Press [Menu] repeatedly to select <DEVICE SETTINGS>.
3
Select the menu.
(1) Use [
] or [
Example: select <PRINT SETTINGS>.
The setting screen for the selected item is displayed.
PRINT SETTINGS
(2) Use [
] or [
Example: select <EXTENDED AMOUNT>.
PRINT SETTINGS
EXTENDED AMOUNT
4
Change the settings.
(1) Use [
] or [
Example: select <SMALL>.
EXTENDED AMOUNT
PRINT SETTINGS
QUIET MODE
Use this function if you want to reduce the operation noise, such as when printing at night.
Important
The printing speed may be reduced compared to when this setting is set to <OFF>.
This function may not be so effective depending on the print quality setting.
Furthermore, certain noise, such as when the machine is preparing for printing, is not
reduced.
PREVENT ABRASION
Use this setting only if the print surface becomes smudged.
Chapter 7
] to select the setting item, then press [OK].
QUIET MODE
] to select the menu, then press [OK].
] to select the setting item, then press [OK].
SMALL
18.
Changing the Machine Settings
91