Canon Pixma MP530 User Manual page 79

2
Use [ ] or [
3
Press [OK] two times.
The MEMORY LIST is printed.
Note
If there are no documents stored in memory, the machine will switch to the standby mode
after <NO DOC. IN MEMORY> is displayed.
In step 2, you can also print this list from <MEMORY LIST> in <PRNT REPORT/LIST> of
the FAX SETTINGS menu (See
Printing or Deleting a Document in Memory
1
Press [FAX], then press [Menu].
2
Use [ ] or [
3
Press [OK].
4
Use [ ] or [
If you select <PRINT DOCUMENT>:
(1) Press [OK].
(2) Use [
want to print, or enter the number using the numeric buttons.
If you are unsure of the transaction number, print the MEMORY LIST (See
the MEMORY LIST" on page
(3) Press [OK].
(4) Use [
print all pages of the document.
(5) Press [OK].
(6) To print another document, return to branch-step 2, or to finish printing, go to step 5.
If you select <DELETE DOCUMENT>:
(1) Press [OK].
(2) Use [
want to delete, or enter the number using the numeric buttons.
(3) Press [OK].
(4) Use [
delete the document.
(5) Press [OK].
(6) To delete another document, return to branch-step 2, or to finish deleting, go to step
5.
5
Press [Stop/Reset].
Checking a Document's Details in Memory
If the machine was not able to print a received fax, as when paper or ink has run out or a paper
jam has occurred, the fax is automatically stored in memory. When selecting a document in
memory to be printed or deleted, you can check its details on the LCD as follows:
Chapter 4
] to select <MEMORY REFERENCE>.
"PRNT REPORT/LIST" on page
] to select <MEMORY REFERENCE>.
] to select <PRINT DOCUMENT> or <DELETE DOCUMENT>.
] or [ ] to select the transaction number (TX/RX NO.) of the document you
] to select <YES> to print the first page only, or use [
] or [ ] to select the transaction number (TX/RX NO.) of the document you
] to select <YES> to delete document, or use [
76).
93).
"Printing
] to select <NO> to
] to select <NO> not to
Faxing
77