Printing Photographs Directly From A Pictbridge Compliant Device - Canon Pixma MP530 User Manual

(3) Turn on and set up the device for direct printing.
Either of the following icons will display on the LCD display of the device when the
machine is correctly connected.
A PictBridge compliant device.
A Canon Bubble Jet Direct compatible digital camera.
Note
If neither of these icons appear, see
page 133.
Printing Photographs Directly from a PictBridge
Compliant Device
When operating the device, be sure to follow the instructions given in the instruction manual supplied
with the PictBridge compliant device. Let's take a look at the page size, media type, layout, image
optimization modes, and date/file no. printing mode that can be set on a PictBridge compliant device
connected to the machine.
Confirming or Changing the Device Settings
To change the page size or media type, operate the device to select the PictBridge print setup
mode and confirm or change the settings.
The settings below can be changed by pressing <DEVICE SETTINGS> in [Menu] on this
machine when a PictBridge compliant device is connected. However, changes can be made on
the PictBridge setting screen only when the corresponding items below are in the "Default"
(selections based on the machine setting) using the controls of the device.
PictBridge compliant device setting items PictBridge setting items (PICTBRIDGE
Paper size: Default
Chapter 3
"Cannot Print Properly from the Digital Camera" on
SET) on the machine
PAGE SIZE
Printing Photographs Directly from a Compliant Device
55