Fujitsu ScanSnap FI-5110C Operator's Manual page 15

CONTENTS CONTENTS
INTRODUCTION
Regulatory Information
Trademarks
Note, Liability
Preface
Safety Precautions
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATIONS
3 SCANNING VARIOUS TYPES OF
DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 DOCUMENT SPECIFICATIONS FOR ADF
8 OPTIONS
9 SCANNER SPECIFICATIONS
Appendix
Safety Precautions(4)
Before moving the scanner, disconnect the power plug from
the power outlet.
Do not move the scanner with the power and interface cables connected as this
can damage the cables, which can later cause fire, electric shock as well as
injury.
Before moving the scanner, be sure to disconnect the power plug from the
power outlet, and all other data cables. Make sure that the floor is free of any
obstructions.
Protect the scanner from static electricity.
Install the scanner away from strong magnetic fields and other sources of
electronic noise. Also, protect the scanner against any static electricity, which
can cause the scanner to malfunction.
Do not use aerosol sprays near the scanner.
Do not use aerosol sprays to clean the scanner. Aerosol sprays can blow dirt
and dust inside the scanner, resulting in scanner failure or malfunction.
Disconnect the power plug from the power outlet when the
scanner is not used for a long period of time.
When the scanner is not going to be used for a long period of time, be sure to
disconnect the power plug from the power outlet.
Do not install the scanner in direct sunlight.
Do not install the scanner under direct sunlight or near heating apparatus. Doing
so might cause excessive heat to build up inside the scanner, which can cause
scanner trouble or even fire. Install the scanner in a well-ventilated location.
1 2 3
4
1 2 3
4