Fujitsu ScanSnap FI-5110C Operator's Manual page 103

CONTENTS CONTENTS
INTRODUCTION
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATIONS
3 SCANNING VARIOUS TYPES OF
DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
6.1 Removing Jammed Documents
6.2 Error Indications in the Operator Panel
6.3 Remedying Typical Troubles
6.4 Items to Check Before Contacting the Agent
Where You Bought the Scanner
6.5 Checking Labels on the Scanner
7 DOCUMENT SPECIFICATIONS FOR ADF
8 OPTIONS
9 SCANNER SPECIFICATIONS
Appendix
Symptom 3 : The scanning does not start.
Back
Is the document loaded correctly on
the ADF paper chute?
Yes
Is the ADF closed completely?
Yes
Is the interface cable connected
correctly?
Yes
Is the connector of the interface cable
broken?
No
Does the scanning start after running
ON the scanner again?
No
If you cannot solve the problem after
taking measures, check the items in
"6.4 Items to Check Before Contacting
the Agent Where You Bought the
Scanner" and contact the dealer or an
authorized FUJITSU service provider.
*) For details, refer to "Getting Started" 2.2 Connecting the scanner to your PC.
Load document correctly on ADF paper
chute.
No
Close the ADF completely.
No
Connect interface cable correctly. (*)
No
Use a new interface cable and correctly
connect it.
Yes
The scanner operation is normal.
Yes