Table of Contents
Advertisement
Quick Links
GETTING STARTED GUIDE
NI PCIe-7820R
R Series Digital I/O Module for PCI Express, 128 DIO,
Kintex-7 160T FPGA
This document describes how to begin using the PCIe-7820R.
Safety Guidelines
Caution
document. Product misuse can result in a hazard. You can compromise the safety
protection built into the product if the product is damaged in any way. If the product
is damaged, return it to NI for repair.
Electromagnetic Compatibility Guidelines
This product was tested and complies with the regulatory requirements and limits for
electromagnetic compatibility (EMC) stated in the product specifications. These requirements
and limits provide reasonable protection against harmful interference when the product is
operated in the intended operational electromagnetic environment.
Do not operate the PCIe-7820R in a manner not specified in this
Advertisement
Table of Contents
Related Manuals for National Instruments PCIe-7820R
Summary of Contents for National Instruments PCIe-7820R
- Page 1 Safety Guidelines Caution Do not operate the PCIe-7820R in a manner not specified in this document. Product misuse can result in a hazard. You can compromise the safety protection built into the product if the product is damaged in any way. If the product is damaged, return it to NI for repair.
-
Page 2: Preparing The Environment
To ensure the specified EMC performance, the length of all I/O cables must be no longer than 3 m (10 ft). Preparing the Environment Ensure that the environment in which you are using the PCIe-7820R meets the following specifications. Operating temperature 0 °C to 40 °C... -
Page 3: Verifying The Kit Contents
2. NI-RIO Media 3. Getting Started Guide Installing Software on the Host Computer Before using the PCIe-7820R, you must install the following application software and device drivers on the host computer. LabVIEW 2017 or later LabVIEW FPGA Module 2017 or later... -
Page 4: Verifying Hardware Installation
10. Attach sensors and signal lines to the device, terminal block, or accessory terminals. Verifying Hardware Installation You can verify that the system recognizes the PCIe-7820R by using Measurement & Automation Explorer (MAX). Launch MAX by navigating to Start»All Programs»National Instruments»MAX or by clicking the MAX desktop icon. - Page 5 EXTCLKIN External clock input source that can be used for source synchronous acquisitions. The provided clock source must be stable and glitch-free. Ground connection The PCIe-7820R is protected from overvoltage and overcurrent conditions. Note Refer to the device specifications, available at ni.com/manuals...
-
Page 6: Digital I/O Connections
When the system powers on, the DIO channels are set as input low with pull-down resistors. To set another power-on state, you can configure the PCIe-7820R to load a VI when the system powers on. The VI can then set the DIO lines to any power-on state. Visit ni.com/info... - Page 7 Shielded R Series High Speed Digital Cable, 1m (156166-01) • Shielded R Series High Speed Digital Cable, 2m (156166-02) For user-supplied cables, visit ni.com/info and enter for ferrite beads that can RDIO2FERRITE be ordered directly from NI. | © National Instruments | 7 NI PCIe-7820R Getting Started Guide...
-
Page 8: Where To Go Next
(EMC) and product safety. You can obtain the DoC for your product by visiting ni.com/certification. If your product supports calibration, you can obtain the calibration certificate for your product at ni.com/calibration. 8 | ni.com | NI PCIe-7820R Getting Started Guide... - Page 9 United States, visit the Worldwide Offices section of ni.com/ niglobal to access the branch office websites, which provide up-to-date contact information, support phone numbers, email addresses, and current events. | © National Instruments | 9 NI PCIe-7820R Getting Started Guide...
- Page 10 NI trademarks. Other product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering NI products/technology, refer to the appropriate location: Help»Patents in your software, the file on your media, or the National Instruments Patent Notice at . You can find patents.txt ni.com/patents...
Need help?
Do you have a question about the PCIe-7820R and is the answer not in the manual?
Questions and answers