Sharp MAX-PRO 1182 Operator's Manual page 42

POWER CONNECTION
The Sharp MAX-PRO is equipped with a 3-prong elec-
trical cord for standard, properly grounded, 115 VAC,
50/60 Hz, 10 Amp (minimum) service.
The MAX-PRO requires two power cords. One is for
the bagger and the other is for the Printer.
1. Before plugging the cord into the back of the ma-
chine, ensure that Main Power Switch is in the
OFF position.
2. Plug Male End of Power Cord into properly
grounded wall outlet or electrical drop.
3. Insert Female End of Power Cord into the Power
Entry Module on back of Electrical Box. The box is
in the Frame Assembly.
4. Turn the switch on the Power Entry Module to ON
position.
MAX-PRO Operator Manual
SECTION 3 - SET-UP & OPERATION
MACHINE PLACEMENT
5. Plug the Male End of second Power Cord into a
6. Insert the Female end into Power Entry Module on
7. Turn the switch to the ON position.
P
RINTER
E
LECTRICAL
B
OX
3-2
properly grounded wall outlet or electrical drop.
top of the Printer Control Box. The box is in the
Frame Assembly, opposite the Electrical Box.
C
ONTROL
B
OX
Original Printed in English