Table of Contents
Advertisement
JOB SETUP SCREEN - PRINTER
Any changes made to this screen requires operator to press 'Load Job' or 'Save & Load' button.
PRINTER SETTINGS
Speed: This numeric setting determines the web feed speed during the print cycle. It is adjustable from
2.00 to 12.00 Inches/Sec. This setting should be set to the same value that resides in the Printer.
Length: This numeric setting determines the distance the web will feed during the print cycle. This
should be set to smallest value that will produce the desired label. This setting is approximately ¾ of inch longer
than the length of the label.
Offset: This numeric setting determines the starting position of the printed label. This can be used to
adjust the label position on the bag. It is adjustable from 0 to 10.00.
Clear Label On Job Load: If ON, loading this job will clear out the label queue on the printer.
In Use: Printer is active in this job. If set to OFF, printer will not print.
MAX-PRO Operator Manual
SCREEN NAVIGATION
2-12
SECTION 2 - CONTROLS
Original Printed in English
Advertisement
Table of Contents
