Saving/Restoring Data - Siemens SIPROCESS UV600 Manual

Important functions (selection)
7.4 Maintenance functions
7.4.3

Saving/restoring data

Using the data backup functions you can internally save a copy of the current settings
("Save") or replace the current settings by a saved copy ("Download").
Two copies can be saved in each case ("last", "last but one"). Downloading of the original
factory settings is suitable e.g. for tests.
Menu call:
Main menu → Maintenance → Data backup
The following menu is displayed:
Initially select the scope of data backup using the
● System: complete system (all analyzer modules)
● Module: a specific module which can be selected under point 2.
You must select this module using the
Then select the desired function using the
● Save: a copy of the current settings is saved.
The following message is displayed if this function is selected: "...save?" which you can
confirm by pressing the
● Download: the current settings are replaced by a saved copy.
If this function is selected, a further menu is displayed with the options:
– Last: replaces the current settings by the last saved copy
– Last but one: replaces the current settings by the penultimate saved copy
– Factory: replaces the current settings by the factory settings.
The following message is displayed if the desired function is selected: "...download?"
which you can confirm by pressing the
The analyzer is automatically restarted following the backup procedure. As a result, the
measuring function is temporarily canceled. The analyzer is ready for operation again
following execution of the restart.
122
,
, and
, and
key.
key.
Operating Instructions, 10/2013, A5E03529375-02
and keys.
keys.
keys.
SIPROCESS UV600