Huawei Sound Joy User Manual page 11

Low power consumption mode
When the speaker is powered on, it enters the idle state. Enabling the low power
consumption mode can save power and prolong the usage time.
To enter low power consumption mode, press and hold the voice button
You can exit the low power consumption mode in either of the following ways: press any
button, use NFC tapping, shake the speaker, or play audio over Bluetooth.
Restore the speaker to its factory settings
To restore the speaker to its factory settings, perform the following:
Make sure that the speaker is connected to a power source, and press and hold the Play/
Pause button and Volume
Update
The speaker can be updated for a better user experience. Please update your speaker to the
latest version in a timely manner.
The update usually takes about 5 to 10 minutes. During the update, ensure that your phone
is connected to the speaker over Bluetooth and the network connection is stable. Do not exit
the update screen. You will not be able to use your speaker during the update.
Charging
1
It is recommended that you use a 5 V/2 A, 9 V/2 A, or 10 V/4 A charger to charge the
speaker. After the speaker is fully charged, remove the charger to prolong the battery
lifespan.
2
It is recommended that you use a Huawei charger and charging cable. The charging speed
will be affected if you use a charger that does not support SCP2.0 or PD3.0 with a
standard charging cable.
Set the speaker name and location
1
Open the AI Life app. On the Home screen, touch the speaker card, touch
upper right corner, and then touch Device settings.
2
On the device settings screen, you can change the Device name and Location.
button at the same time for about 5 seconds.
User Guide
for 5 seconds.
in the
10