Technical Data - DeWalt XR LI-ION DCD780 Original Instructions Manual

EnGLIsh
CORDLESS COMPACT 13 mm DRILL/DRIVER
DCD780
CORDLESS COMPACT 13 mm DRILL/DRIVER/HAMMERDRILL
DCD785
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.

Technical Data

Voltage
Type
Battery type
No-load speed
1st gear
2nd gear
Impact rate
1st gear
2nd gear
Max. torque (hard/soft)
Chuck capacity
Maximum drilling capacity
Wood
Metal
Masonry
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841-2-1:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
Drilling into metal
Vibration emission value a
h,D
Uncertainty K =
Impact drilling into concrete
Vibration emission value a
h,ID
Uncertainty K =
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN62841 and may be used to compare one tool with
another. It may be used for a preliminary assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
26
WALT one of the
e
DCD780
V 18
DC
1/10
Li-Ion
min -1 0–600
min -1 0–2000
min -1 –
min -1 –
Nm 60/23
mm 13
mm 38
mm 13
mm –
kg 1.2
dB(A) 87
dB(A) 98
dB(A) 3
= m/s 2 4.2
m/s 2 1.5
= m/s 2 –
m/s 2 –
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
DCD785
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
18
the tool and the accessories, keep the hands warm (relevant
1/10
for vibration), organisation of work patterns.
Li-Ion
EC‑Declaration of Conformity
0–600
Machinery Directive
0–2000
0–10200
Drill/Driver/Impact Drill
0–34000
DCD780, DCD785
60/23
D WALT declares that these products described under Technical
e
13
Data are in compliance with:
2006/42/EC, EN62841-1:2015+AC:2015, EN62841-2-
1:2018+A11:2019.
38
These products also comply with Directive 2014/30/EU and
13
2011/65/EU. For more information, please contact D
13
the following address or refer to the back of the manual.
1.24
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
87
98
3
Markus Rompel
Vice-President Engineering, PTE-Europe
4.2
D WALT, Richard-Klinger-Straße 11,
e
1.5
65510, Idstein, Germany
16.08.2021
15.4
DECLARATION OF CONFORMITY
1.5
THE SUPPLY OF MACHINERY (SAFETY)
DRILL/DRIVER/IMPACT DRILL
REGULATIONS 2008
DCD780, DCD785
WALT at
e
WALT.
e