Table of Contents
Advertisement
PAN9028 Wi-Fi/Bluetooth Module
6 Recreating SD Card Image
During the evaluation of the system, it might be necessary to start from scratch.
To recreate the SD card image, the image needs to be written to the existing or a new SD card.
How this can be achieved depends on the host system that is used.
Please contact your local Panasonic sales representative to obtain the SD
card image.
For using Windows please refer to
For using Linux please refer to
6.1 Using Windows
Using Windows, the Win32 Disk Imager or a similar tool, to write the SD card image to a SD
card, can be used.
1. Select the image file (1).
2. Select a destination (2).
3. Click Write (Schreiben) (3) to write the SD card.
6.2 Using Linux
Using Linux, the easiest way is to use the tool dd on the command line.
1. Insert the target SD card into the device.
2. Open a terminal application window.
Quick Start Guide Rev. 1.0
6.1 Using
Windows®.
6.2 Using
Linux.
®
6 Recreating SD Card Image
Page 29 of 34
Advertisement
Table of Contents
