Disassembly Instructions And Adjustments; Replacement Of Panel A; Replacement Of Dry Filter And Filter Frame - Panasonic NA-D106X1 Service Manual

8 Disassembly Instructions and Adjustments

Warning
Connection of cables should be done according to regular work.
• When drawing cables around, fixing those cables with cable suppression part. Do not touch rotating part, high temperature part and
surface of metal.
• Be sure to replace with cable unit when any cable was snapped. When a part of the cable unit was cut you must not do the
connection repair. It may be the cause of smoke, ignition or receiving an electric shock.
• Be sure to replace the whole cable unit when it is judged that connectors (solderless terminals) are connected inappropriately.
Doing this operation improperly may cause smoke, fire or electric shock.
Disconnect the power plug before disassembling, assembling or replacing parts.
Do not modify devices, parts, or components when repairing the appliance. Doing this may cause failure or a safety hazard.
A Faston terminal must be inserted or removed in a straight direction without wrenching it; handling the Faston improperly may cause
malfunction or fire.
8.1. Panel A, Dry filter, Filter frame
and Top board
8.1.1.

Replacement of Panel A

Required tools : Protective sheet, Screwdriver, Protective
equipment etc.
1. Push down the Panel A (away from the body) in the
direction of an arrow to remove it from the Rod shaft.
*The hooks are engaged in the Rod shaft. Push down the
Panel A while moving it to the right.
8.1.2. Replacement of Dry filter and Filter
frame
1. Remove the Dry filter and the Filter frame.
25
NA-D106X1