Clearing And Acknowledging; Web Hmi Views - ABB SSC600 Operation Manual

1MRS758850 C
4.1.7

Clearing and acknowledging

Reset, acknowledge or clear all messages and indications, including LEDs and
latched outputs as well as registers and recordings, in the Clear menu.
1.
2.
3.
4.1.8

Web HMI views

The different views available in the WHMI are illustrated below. Use the View bar to
access different views.
Figure 18: View bar
• The General view shows the IED version and status.
• The Events view contains a list of events produced by the application
configuration.
• The Programmable LEDs view shows the status of the programmable virtual
LEDs.
• The Phasor diagrams view shows phasor diagrams.
• The Disturbance records view shows the list of disturbance records.
• The Fault records view shows the list of fault records.
• The Single Line Diagram view shows the single-line diagram.
• The Report summary page allows to save events, fault records, disturbance
records and the parameter list.
• The Maintenance page allows to store backups of relay and merging unit
configurations.
• Logout ends the session.
SSC600
Operation Manual
Select Clear from the main menu structure.
Figure 17: Selecting clear menu
Set the New Value to Clear for those items to be cleared.
Select Write to IED to save the changes.
IED operation
39