Authorizations; User Authorization - ABB SSC600 Operation Manual

1MRS758850 C
3.3

Authorizations

3.3.1

User authorization

Four users have been predefined for WHMI, each with different rights and default
passwords (refer to table Default roles-to-rights in the Cyber Security Deployment
Guideline). Local connection is allowed only from the Ethernet port called 'Local
port'. Via the local connection user is allowed to perform local control operations
such as opening or closing circuit breaker. From all other Ethernet ports only
remote connections are allowed.
Passwords are settable for all predefined users. The password must contain at least
nine characters. The maximum number of characters is 20. Only the following
characters are accepted.
• Numbers 0-9
• Letters a-z, A-Z
• Space
• Special characters !"#%&'()*+´-./:;<=>?@[\]^_`{|}~
Table 8: Predefined users and default passwords
Username
VIEWER
OPERATOR
ENGINEER
ADMINISTRATOR
SSC600
Operation Manual
Password
remote0001
remote0002
remote0003
remote0004
For user authorization for PCM600, see PCM600 documentation.
Commissioning
User rights
Only view access
Authorized to make opera-
tions
Allowed to change IED pa-
rameters, but no operation
rights
Full access
25