Table of Contents
Advertisement
3
Installing the Hopper
Assembly
Parts needed for this procedure:
1
Hopper assembly
1
Hairpin cotter
1
Hitch pin
Procedure
1.
Insert the hopper hitch tube into the receiver on
the machine.
1. Hopper hitch tube
2. Hitch pin
2.
Use the hitch pin and hairpin cotter to secure the
hopper assembly to the aerator.
Figure 4
3. Cotter pin
4
Installing the Cable-Mount
Bracket
Parts needed for this procedure:
1
Cable-mount bracket for 24-inch machines
1
Cable-mount bracket for 30-inch machines
1
Carriage bolt (5/16 x 1 inch)—24-inch machines only
1
Carriage bolt (1/4 x 1 inch)—24-inch machines only
1
Locknut (1/4 inch)—24-inch machines only
2
Locknut (1/4 inch)—30-inch machines only
2
Bolt (1/4 x 5/8 inch)—30-inch machines only
Procedure
Choose the appropriate cable-mount bracket by
matching the holes to the right side of the machine.
Use the hardware shown in
bracket.
g213510
1. Bracket for 30-inch aerator 5. Carriage bolt (5/16 x 1
2. Bolt (1/4 x 5/8 inch)
3. Locknut (1/4 inch)
4. Bracket for 24-inch aerator 8. Locknut (1/4 inch)
8
Figure 5
to install the
Figure 5
inch)
6. Remove and use this nut
to mount the bracket.
7. Carriage bolt (1/4 x 1 inch)
g213563
Advertisement
Table of Contents
