Spare Parts / Replacement Parts; Repair; Uk Plug - Titan TTB776VAC Instructions Manual

TTB776VAC by TITAN

Spare parts / Replacement parts

The following parts of this product may be replaced by the consumer. Spare parts
are available at an authorised dealer or through our customer service.
Description
Foam sleeve (22)
Cartridge filter (23)
Dust bag (24)

Repair

This product does not contain any parts that can be repaired by the consumer.
Contact an authorised service centre or a similarly qualified person to have it
checked and repaired.

UK plug

If you need to replace the fitted plug, then follow the instructions below.
IMPORTANT: The wires in the mains lead are coloured in accordance with the
following code:
Blue – Neutral Brown – Live
As the colours of the wire in the mains lead of this product may not correspond
with the coloured marking identifying the terminals in your plug, proceed as
follows. The wire, which is coloured blue, must be connected to the terminal,
which is marked with N or coloured black. The wire, which is coloured brown,
must be connected to the terminal, which is marked L or coloured red.
WARNING! Never connect live or neutral wires to the earth terminal of
the plug, which is marked with E.
Connect Blue to N
(Neutral)
Outer sleeve
Only fit an approved BS 1363 or BS 1363/A plug and correctly rated BS 1362 13
Amp fuse. If in doubt, consult a qualified electrician.
NOTE: If a moulded plug is fitted and has to be removed take great
care in disposing of the plug and severed cable, it must be destroyed
to prevent engaging into a socket.
Care and maintenance
Model no. or Specification
TTU786ACC
TTU790ACC
TTU789ACC / TTU788ACC
13 AMP fuse approved
to BS 1362
Brown L (Live)
Cable grip
35