Page 1
Wet/Dry Vacuum Cleaner 1500 W TTB777VAC EAN: 5059340106229 WARNING: Read the instructions before using the product! BX220IM...
Page 2
GUARANTEE This TITAN product carries a 2 year guarantee. If your product develops a fault within this period, you should, in the first instance contact the retailer where the item was purchased.
TTB777VAC by TITAN Let’s get started... These instructions are for your safty. Please read through them thoroughly before use and retain them for future reference. Getting started... Safety information Your product Technical specifications Before you start detail more Product functions...
Safety information TTB777VAC by TITAN MWDV16L-A by MacAllister Safety warnings IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE! > This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience...
Page 5
Safety information TTB777VAC by TITAN MWDV16L-A by MacAllister combustible liquids, such as gasoline, photocopier powder or volatile substances; and do not use the product in areas where these liquids are present. Do not vacuum up acids. > Do not vacuum up any objects which are toxic, cancer...
Page 6
Safety information MWDV16L-A by MacAllister TTB777VAC by TITAN of the operator. > The operator or user is responsible for accidents or hazards occurring to other people or their property. Preparation > Obtain ear protection and safety glasses. Wear them at all times while operating the product.
Page 7
Safety information TTB777VAC by TITAN MWDV16L-A by MacAllister > If the product should start making any unusual noise or vibration, immediately shut off the power source and allow the product to stop. Disconnect the product from the supply and take the following steps before restarting and operating the product: - inspect for damage;...
Page 8
Safety information TTB777VAC by TITAN MWDV16L-A by MacAllister > Slightly dampen surfaces in dust conditions or use mister attachment. Electrical safety > Ensure the rated voltage shown on the rating label corresponds with the voltage of the power supply. > Do not operate any product with a damaged power cord or plug, when the product malfunctions or has been damaged in any manner.
Page 9
Safety information TTB777VAC by TITAN MWDV16L-A by MacAllister Residual risks Even if you are operating this product in accordance with all the safety requirements, potential risks of injury and damage remain. The following dangers can arise in connection with the structure and design of this product: >...
Page 10
Safety information TTB777VAC by TITAN MWDV16L-A by MacAllister grinding Breathing in very fine particles of crystalline silica can lead to the development of: Lung cancer Silicosis Chronic Obstructive Pulmonary Disorder (Chronic obstructive pulmonary disease (COPD)) And breathing in fine particles of wood dust can lead to the...
Page 11
Safety information TTB777VAC by TITAN MWDV16L-A by MacAllister http://www.hse.gov.uk/construction or http://www.hse.gov. uk/pubns/cis69.pdf WARNING! Some dust created by power sanding, sawing, grinding, drilling and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are:...
Page 12
Safety information MWDV16L-A by MacAllister TTB777VAC by TITAN Symbols On the product, the rating label and within these instructions you will find among others the following symbols and abbreviations. Familiarise yourself with them to reduce hazards like personal injuries and damage to property.
Page 13
Safety information MWDV16L-A by MacAllister TTB777VAC by TITAN Switch the product off and disconnect it from the power supply before assembly, cleaning, adjustments, maintenance, storage and transportation. Wet or damp Blowing Keep bystanders away! Objects thrown by the product could hit the user or other bystanders.
Your product / Technical specifications TTB777VAC by TITAN MWDV16L-A by MacAllister Push/Pull handle 16. Handle sockets (x 2) Motor unit a. PVC washer* (x 2) a. Safety valve* b. Rubber washer* (x 4) Plastic clasp (x 2) c. Washer* (x 4) Tank d.
Before you start TTB777VAC by TITAN MWDV16L-A by MacAllister Unpacking Unpack all parts and lay them on a flat, stable surface. > Remove all packing materials and shipping devices, if applicable. > Make sure the delivery contents are complete and free of any damage. If you find that parts are missing or show damage do not use the product but contact your dealer.
Page 17
Before you start MWDV16L-A by MacAllister TTB777VAC by TITAN Illustration Description Possible application Push/Pull handle (1) Rear Wheel (5) Castor (7) Connect the hose (18) to the air Hose (18) inlet / outlet (9, 13). Connect attachments / accessories Hose handle (18a) onto the hose handle (18a).
Page 18
Before you start MWDV16L-A by MacAllister TTB777VAC by TITAN Filter finer particles to protect the Cartridge filter (25) motor (2). Collect debris and large dust Dust bag (26) particles. Assembly WARNING! The product must be fully assembled before operation! Do not use a product that is only partly assembled or assembled with...
Page 19
Before you start TTB777VAC by TITAN MWDV16L-A by MacAllister > Align and slide the rear wheels (5) onto the supports. The rear wheels and the vacuum base are marked with the numbers 1 and 2. Insert wheel 1 into slot 1 on the back of the vacuum;...
Page 20
Before you start MWDV16L-A by MacAllister TTB777VAC by TITAN 16b 16c 16d Fig. 5 > Insert the push/pull handle (1) into the handle sockets (2) mounted on either side of the collection tank. Push down until the lock pins click in place (Fig. 6).
Page 21
Before you start MWDV16L-A by MacAllister TTB777VAC by TITAN Product configurations This product is designed for dry and wet vacuuming as well as blowing. Assemble the accessories and attachments according to the desired operation. NOTE: Always use the product: – with cartridge filter (25) and dust bag (26) assembled for dry vacuuming and blowing (Fig.
Page 22
Before you start TTB777VAC by TITAN MWDV16L-A by MacAllister Dust collection and blowing > Place the dust bag (26) into the tank (4). Ensure the dust bag opening (26a) is located on top. > Hold the side flaps of the dust bag opening (26a) and slide the dust bag opening (26a) onto the inner opening of the air inlet (9) (Fig.
Page 23
Before you start TTB777VAC by TITAN MWDV16L-A by MacAllister Liquid collection NOTE: Always ensure the cartridge filter (25) and dust bag (26) are NOT used for wet vacuuming. > Slide the foam sleeve (24) onto the motor unit (2) (Fig. 12). Ensure it sits properly in position.
Page 24
Before you start MWDV16L-A by MacAllister TTB777VAC by TITAN Fig. 14 Fig. 15 Hose (blowing) > Align the arrow on the hose connector (18b) with the tab on the outer opening of the air outlet (13) and slide the hose connector onto the air outlet (Fig. 16, step 1).
Page 25
Before you start MWDV16L-A by MacAllister TTB777VAC by TITAN Accessories > Connect the extension tube(s) (19) and / or accessory (20, 21, 23) onto the hose handle (18a) if required (Fig. 18). Fig. 18 > Remove the respective attachment (20, 21, 23) and / or extension tube(s) (19) from the hose handle (18a) if necessary.
Page 26
TTB777VAC by TITAN MWDV16L-A by MacAllister more detail… Product functions Operation Care and maintenance Troubleshooting Recycling and disposal...
MWDV16L-A by MacAllister Intended use > This vacuum cleaner TTB777VAC is designated with a rated input of 1500 Watts. This product is intended for wet and dry vacuuming operations with respective attachments only. This product can also be used as an occasional blower.
Page 28
Product functions TTB777VAC by TITAN MWDV16L-A by MacAllister Cartridge filter (dry vacuuming and blowing) Use the cartridge filter (25) to collect particles that are not already caught by the dust bag (26). Always assemble the cartridge filter (25) onto the motor unit (2) for dry vacuuming operations (Fig.
Page 29
Product functions TTB777VAC by TITAN MWDV16L-A by MacAllister Safety valve > The product is designed with a safety valve (2a) to prevent water from entering into the motor unit (2) during wet vacuuming operations (Fig. 22). Before using, check that the safety valve moves freely within the cage.
Operation TTB777VAC by TITAN MWDV16L-A by MacAllister General operation > Check the product, its power cord and plug as well as accessories and attachments for damage before each use. Do not use the product if it is damaged or shows wear.
Page 31
Operation TTB777VAC by TITAN MWDV16L-A by MacAllister Wet vacuuming > During wet vacuuming, check the water level in the tank regularly. The water level should be below the air inlet (9) (Fig. 26). Empty the tank (4) regularly if large quantities of water are to be vacuumed.
Page 32
Operation MWDV16L-A by MacAllister TTB777VAC by TITAN Blowing This product is designed for light blowing. This operation requires some accessories and attachments. Consult the section Product configurations for details. > Before operation, loosen leaves that are stuck to the ground using a broom or rake.
Page 33
Operation MWDV16L-A by MacAllister TTB777VAC by TITAN WARNING! Do not plug any tool or appliance rated over the maximum wattage for the receptacle as noted in the chart above into the electrical socket on the vacuum cleaner. Check nameplate of the tool for the wattage rating. To reduce the risk of injury, additional power tool must be turned (O) OFF before placing on/off switch (11) in the (II) AUTO position.
Care and maintenance TTB777VAC by TITAN MWDV16L-A by MacAllister The golden rules for care WARNING! Always switch the product off, disconnect the product from the power supply and let the product cool down before performing inspection, maintenance and cleaning work! >...
Page 35
Care and maintenance MWDV16L-A by MacAllister TTB777VAC by TITAN > Press the on / off switch (11) to position O to switch the product off. > Remove the attachment fitted onto the hose handle (18a) / extension tube (19). > Disassemble the tank (4) in reverse order of assembly and disconnect the hose (18) / extension tube(s) (19), according to the product configuration.
Page 36
Care and maintenance TTB777VAC by TITAN MWDV16L-A by MacAllister Spare parts / Replacement parts The following parts of this product may be replaced by the consumer. Spare parts are available at an authorised dealer or through our customer service. Description Model no.
Page 37
Care and maintenance MWDV16L-A by MacAllister TTB777VAC by TITAN Storage > Switch the product off and disconnect it from the power supply. > Disconnect the respective attachment (20, 21, 23), hose (18) and extension tube(s) (19) if necessary. > Clean and empty the product as described above.
Troubleshooting TTB777VAC by TITAN MWDV16L-A by MacAllister Troubleshooting Suspected malfunctions are often due to causes that the users can fix themselves. Therefore check the product using this section. In most cases the problem can be solved quickly. WARNING! Only perform the steps described within these instructions!
Troubleshooting / Recycling and disposal TTB777VAC by TITAN MWDV16L-A by MacAllister Problem Possible Cause Solution 4. Unsatisfactory 4.1. Attachment not suitable 4.1. Use proper attachment result for working surface 4.2. Dust bag is full 4.2. Replace with a new dust 4.3.
Page 40
Manufacturer,Fabricant,Producent, Producător,Fabricante: UK Manufacturer: Kingfisher International Products Limited 3 Sheldon Square London W2 6PX United Kingdom EU Manufacturer: Kingfisher International Products B.V. Rapenburgerstraat 175E 1011 VM Amsterdam The Netherlands www.diy.com www.screwfix.com, www.screwfix.ie To view instruction manuals online, visit www.kingfisher.com/products...
Need help?
Do you have a question about the TTB777VAC and is the answer not in the manual?
Questions and answers