• The manual instructions and provided parts are based on the typical walls (made of wood or concrete). (In case of the WMN-M22E(A) model, the drywall mounting parts are additionally provided.) • In case of the other cases, use separate mounting parts or perform wall reinforcement in advance. If required, install the wall mount with an aid of expert.
Page 3
• When installing or uninstalling the wall mount support frame, make sure 2 people work on it, and the TV is off. • Use a flat table when installing the wall mount. Use the TV packing material (cushion) for curved TVs. Flat TV Curved TV •...
Page 4
• In cases with tight installation conditions, friction between the TV/accessories and the wall may damage the wall or the back of the TV. Use a scratch protector as in the picture in such cases. However, distance from the wall may increase.
Page 5
• If there is a protruding part on the wall where you want to install the wall mount, you may use accessories to secure enough distance between the TV and a wall. (Adjust the horizontal length of the part to be the same.) However, the distance to the wall will become larger.
Page 6
• After wall mount installation, movement may occur on some TV models depending on the rear shape of the TV. In this case, use the separation holder ( Triangular support allows more stable wall mount installation. However, distance from the wall may increase. •...
Page 7
• When you grab the TV to install, remove, adjust the horizontal level, or tilt the wall mount, do not apply direct force on the display. • When you handle the TV to install, remove, adjust the horizontal level, or tilt the wall mount, be careful not to damage any cables.