Bluetooth; Play From Bluetooth Enabled Devices; Other Features; Set Alarm Time - Philips 7000 Series User Manual

6 Bluetooth

Note
•
The effective operation range between this unit and
your Bluetooth enabled device is approximately 10
meters (33 feet).
•
Any obstacle between this unit and your Bluetooth
enabled device can reduce the operational range.
Play from Bluetooth enabled
devices
1
Press SOURCE repeatedly to select
Bluetooth mode.
» [BT] and will flash.
2
When [Philips R7705] is displayed on
your device, select it to start pairing and
connection. If necessary, enter default
password "0000".
» If you fail to search for "Philips R7705"
or cannot pair with this unit, press and
hold for more than 2 seconds to enter
pairing mode.
» When successfully connected, [BT] and
will turn steady and you will hear a
pairing chime.
3
Play audio on the connected device.
» Audio streams from your Bluetooth
enabled device to this unit.
To disconnect the Bluetooth enabled device,
turn off Bluetooth on your device.
8 EN
Philips R7705

7 Other features

Set alarm time

Set alarm
Note
•
You can only set the alarm in standby mode.
•
Make sure that you have set the clock correctly.
1
In standby mode, press and hold AL1 or
AL2 for more than 2 seconds to set alarm
time.
2
Press HR to set hour and MIN to set
minute, then press AL1 or AL2 to confirm.
3
TUN
Press
once, weekdays, or weekends), then press
AL1 or AL2 to confirm.
4
TUN
Press
DAB, FM, or buzzer), then press AL1 or
AL2 to confirm.
5
TUN
Press
then press AL1 or AL2 to confirm.
Tip
•
The unit exits alarm setting mode when being idle for 15
seconds.
Activate/deactivate alarm timer
Press AL1 or AL2 repeatedly to activate or
deactivate the alarm timer.
» If the alarm timer is activated, the alarm
indicator turns on.
» If the alarm timer is deactivated, the alarm
indicator turns off.
» The alarm repeats ringing for the next day.
» To stop the alarm, press the coresponding
AL1 or AL2.
to set alarm type (daily,
to set an alarm source (BT,
to set the volume level,