Get Started; Install Batteries; Connect Power; Set Time - Philips 7000 Series User Manual

3

Get started

Always follow the instructions in this chapter in
sequence.

Install batteries

The batteries can only back up clock and alarm
settings.
Caution
Risk of explosion! Keep the batteries away from heat,
sunshine or fire. Never discard batteries in fire.
Batteries contain chemical substances, so they should
be disposed of properly.
Insert 2 AAA batteries (not provided) with
correct polarity (+/-) as illustrated.

Connect power

Caution
Risk of product damage! Make sure that the power
voltage corresponds to the voltage printed on the back
or underside of the clock radio..
Risk of electrical shock! When you unplug the power
adapter, always pull the plug from the socket. Never
pull the cord.
Use only the AC power adapter specified in the
manufacturer or sold with this unit.
Note
The type plate is located at the bottom of the clock radio.
EN
4

Set time

Note
You can only set time in standby mode.
1
In standby mode, press and hold SET TIME
for more than 2 seconds.
2
Press TUN
<12 HR> hour format, then press SET
TIME to confirm.
3
Press HR to set hour and MIN to set
minute, then press SET TIME to confirm.
4
TUN
Press
year [DD-MM-YY], then press SET TIME
to confirm.
5
TUN
Press
FROM RADIO> or <NO UPDATE>, then
press SET TIME to confirm.
[SAVED] is displayed and the time is set.

Turn on

Press to turn on the clock radio.
The unit switches to the last selected
source.
To switch to standby mode, press
The real-time clock is displayed.
Note
•
This product will switch to standby mode after 15
minutes of inactivity.
to select <24 HR> or
to set date, month and
to select <UPDATE
again.