Moving The Inverter; Installing The Mounting Bracket - Huawei SUN2000 Series User Manual

SUN2000-(29.9KTL, 33KTL-A, 36KTL, 42KTL)
User Manual

4.4.2 Moving the Inverter

For details, see

4.4.3 Installing the Mounting Bracket

Context
Figure 4-22
Figure 4-22 Mounting bracket dimensions
Procedure
Step 1 Remove the security torx wrench from the mounting bracket and set it aside.
Figure 4-23 Removing a security torx wrench
Step 2 Determine the positions for drilling holes using the mounting bracket. Level the hole positions
using a level, and mark the hole positions using a marker.
Issue 11 (2019-06-08)
4.3.2 Moving the
shows the SUN2000 mounting bracket dimensions.
The SUN2000 mounting bracket has 16 tapped holes in four groups. Mark any hole in each group based
on site requirements and mark four holes in total. Two round holes are preferred.
Copyright © Huawei Technologies Co., Ltd.
Inverter.
4 System Installation
34