NEC Express5800 Series User Manual page 57

Chapter 2 Preparations
4. Attach the TPM kit with the connector grooves on the motherboard. Press the connector in firmly
and install the TPM kit. Please check the location of the TPM connector on the motherboard by
looking at the quick reference level attached to the back of the top cover.
5. Installing the TPM cover.
Align the holes and locking latches on both sides of the TPM connector.
①
Press down the center of the cover firm and straight until you hear a locking sound.
②
6. Re-attach the options and cables that were removed in step 3.
7. See Chapter 2 (1.5 Top Cover) to attach the top cover of the server.
Note
If you try to remove the already attached TPM from the motherboard you will
damage the TPM cover, TPM, and motherboard. Data including that stored in TPM
key will be detected if you turn on the power the TPM that has been removed from
the original server and installed on another server.
Note
In order to prevent damage of the system due to improper cooling or elevated
temperature, please do not activate the server or enclosure without implementing
any of component or blank on all of drive bays and device bays.
Express5800/R120h-2E User's Guide
1. Installing Internal Optional Devices
57