Installing The Cable Management Arm N8143-126 - NEC Express5800 Series User Manual
Express server
Hide thumbs
Also See for Express5800 Series:
- User manual (574 pages) ,
- Maintenance manual (238 pages) ,
- Installation manual (75 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
2.2.2
Installing the cable management arm N8143-126
A cable management arm can be installed to the unit for combining the multiple cables connected to the device.
Install the cable management arm in the following steps.
1.
Insert the two fixed parts of the cable management arm into the outer rail and the inner rail behind the
rack.
2.
Put multiple cables in the binding belt and secure them
3.
Insert the fixed parts of the supplied cable management arm into the outer rail on the opposite side.
162
Express5800/R120h-2E User's Guide
2. Installation and Connection
Advertisement
Table of Contents
