Installation & Setup Guide
28. Up / Down
• Use these buttons to raise or lower the selected channel's intensity by the pre-determined level in [S2] "Show
Options."
• Use with [SHIFT] to move the selected channel's intensity one percentage point.
• In dialogue boxes, these buttons will raise or lower number boxes by pre-determined levels (cue number by 10,
time by 10, SMPTE by 1 minute etc.).
29. Update
• When making changes live, press [UPDATE] [ENTER] to update the current cue with the changed levels.
[SHIFT][UPDATE] will open the update dialogue box for increased information on what can be updated based on
what has changed.
• If you have changed tracking levels or palettes, you can select different items from the list to update (i.e. Track
Back and Palette Update).
• If you have used the [LOAD] button to load a Cue or Look, once you make the changes, press [UPDT] to store the
changes and release any selected channels. (You will not be able to use this button if you did not use All Attributes
during your load operation.
30. View
• Opens the View Properties dialogue box where properties are displayed.
• Press [VIEW] [NUMBER] [ENTER] to see a channel's Label dialogue box.
• Press [VIEW] [SELECT] to get a Cue List's properties.
• Press [VIEW] [BUMP] to get a Look Master properties (including the ability to delete a Look).
3 0
Controls
Palette II Lighting Control Console