Palette II Lighting Control Console
HOOK-UP
1. Connecting Console Components
To connect console components, do the following:
Step 1. At console rear panel, connect power supply (included).
Step 2. Connect monitor or touchscreen (sold separately).
Step 3. Connect USB mouse and keyboard.
2. DMX512 Output
The console provides two standard XLR 5-pin connectors for connecting to DMX512 devices. Each connector
supports one DMX512 universe of 512 DMX channels.
Power
Processor
PROCESSOR DETAIL
Monitor
Power
(HDB-15F)
Figure 1: Connecting Console Components
DMX512 Out
(XLR-5M)
Monitor (HDB-15F)
Serial (DB-9M)
Network
(RJ-45)
Audio (2)
USB (2)
Installation & Setup Guide
11
Hook-Up