Table of Contents
Advertisement
Installation & Setup Guide
Step 6. While in "Hardware Setup>Console," verify that other important and systemic features are set correctly for
you.
a. Level Entry Mode - this is the format for Command Line Entry.
1) Use Enter Key - the Enter key finishes off all Command Line entries. For example, [1] [@] [5]
2) Single Digit Entry - a single digit is used for level entry. For example, [1] [@] [5] will set channel 1
3) Two Digit Entry - two digits are used for level entry. For example, [1] [@] [5] [0] will set channel 1
b. Record Includes Subs - when checked, this will include levels that are outputting from submasters when
recording cues or looks. The default is unchecked. This status will appear on the command line when
you press [RECORD] by showing you either [LIVE-SUBS] or [LIVE+SUBS]
c. Show Cue List Controls - when checked, this will display the cue list control icon bar above the existing
list of cues.
Step 7. Go to "Show Options>Cue List." Verify that the two options with check boxes are set correctly for you.
a. Goto Cue On Record - this ensures that the console is placed in the cue when the record function is used.
b. Release Fixtures on Record/Update - this ensures that all channels/fixtures are released when a cue is
recorded or updated.
1 4
Installation and Power Up
[ENTER] will set channel 1 to 50%.
to 50%.
to 50%.
Palette II Lighting Control Console
Advertisement
Table of Contents
