Replacing A Turn Signal Light Bulb Or The Tail/Brake Light Bulb - Yamaha 2007 V Star XVS650W Owner's Manual

PERIODIC MAINTENANCE AND MINOR REPAIR
WARNING
Headlight bulbs get very hot. There-
fore, keep flammable products away
from a lit headlight bulb, and do not
touch the bulb until it has cooled
down.
4. Place a new headlight bulb into po-
sition, and then secure it with the
bulb holder.
CAUTION:
Do not touch the glass part of the
headlight bulb to keep it free from
oil, otherwise the transparency of
6
the glass, the luminosity of the bulb,
and the bulb life will be adversely af-
fected. Thoroughly clean off any dirt
and fingerprints on the headlight
bulb using a cloth moistened with al-
cohol or thinner.
EWA10790
1. Do not touch the glass part of the bulb.
ECA10660
5. Install the headlight bulb cover,
and then connect the coupler.
6. Install the headlight unit by install-
ing the screws.
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
Replacing a turn signal light
bulb or the tail/brake light bulb
1. Remove the lens by removing the
1. Screw
XVS650W
1. Screw
6-30
screws.
EAU24281