Display Assembly - HP ZBook Studio G4 Maintenance And Service Manual

Display assembly

NOTE: The Dream Color display assembly and touch screen is spared as a whole unit assembly only. The
non-touch display assembly is spared at the subcomponent level only. For non-touch display assembly spare
part information, see the individual removal subsections.
Description
15.6-in, UHD, UWVA, Dream Color display assembly not equipped with a camera
15.6-in, UHD, UWVA, Dream Color display assembly equipped with a camera
15.6-in, FHD, UWVA display assembly with a touch screen
To remove the display assembly and access the LED display assembly subcomponents, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
6. Remove the thermal module (see
7. Remove the display cable (see
8. Remove the solid-state drive (see
9. Remove the WLAN module (see
10. Remove the system board (see
Remove the display assembly:
1. Disconnect the antennas from the WLAN module (1), and then remove the antennas from the routing
path around the fan (2).
Bottom cover on page
Battery on page 41).
Thermal module on page
Display cable on page
Solid-state drive (M.2) on page
WLAN module on page
System board on page
29).
38).
45).
31).
33).
46).
Component replacement procedures
Spare part number
921034-001
921035-001
921036-001
53