Left - HP ZBook Studio G4 Maintenance And Service Manual

Component
(5)
(6)

Left

Component
(1)
(2)
(3)
(4)
(5)
6 Chapter 2 Components
Power connector
AC power light
Security cable slot
RJ-45 (network) jack/status
lights
USB 3.x SuperSpeed port
USB 3.x charging port
Memory card reader
Description
Connect a display device that has a USB Type-C connector, providing display output.
NOTE: Your computer may also support a Thunderbolt docking station.
– or –
Connect a DisplayPort device that has a USB Type-C connector, providing display
output.
Connects an AC adapter.
White: The computer is connected to external power.
Off: The computer is not connected to external power.
Description
Attaches an optional security cable to the computer.
NOTE: The security cable is designed to act as a deterrent, but it may not prevent
the computer from being mishandled or stolen.
Connects a network cable.
● Green (right): The network is connected.
Blinking amber (left): Activity is occurring on the network.
●
Connects a USB device, such as a cell phone, camera, activity tracker, or smartwatch,
and provides high-speed data transfer.
When the computer is on, connects and charges a USB device, such as a cell phone,
camera, activity tracker, or smartwatch, and provides high-speed data transfer.
Reads optional memory cards that store, manage, share, or access information.
To insert a card:
1. Hold the card label-side up, with the connectors facing the computer.
2. Insert the card into the memory card reader, and then press in on the card until it
is firmly seated.
To remove a card:
Press in on the card, and then remove it from the memory card reader.
▲