Power Specifications; Switching Performance - Lenovo RackSwitch G8264 Installation Manual

Power Specifications

Switching Performance

86
RackSwitch G8264 Installation Guide
The power specifications for the G8264 are listed in the following table.
Table 16. G8264 AC power specifications
Specification
Number of power supplies
AC-input frequency (universal)
AC inrush current
AC-input current (typical)
AC-input current (maximum)
Power supply rated output power
System power dissipation (typical)
System power dissipation (maximum)
DC-output current (typical)
The feature performance characteristics of the G8264 are listed in the following
table.
Table 17. G8264 feature performance characteristics
Feature
Switching architecture
Throughput
Ethernet line rate
Deterministic port-to-port latency
IEEE 802.1Q VLANs
Forwarding database entries
Configurable interfaces
ARP entries
Note: The specific features supported on your switch, as well as some capacity
and performance characteristics, depend on the specific firmware installed.
For more information, see the Application Guide and Command Reference
for your specific switch and its installed firmware.
Measurement
2 (1+1 load sharing/redundant)
50–60 Hz
15A
2.75 A (RMS) @ 120 VAC
1.435 A (RMS) @ 230 VAC
3.125 A (RMS) @ 120 VAC
1.630 A (RMS) @ 230 VAC
450 W each
330 W
375 W
23.4 A
Characteristics
Non-blocking
1,280 Gbps full-duplex
100%
less than 2 µs with 64-byte packets
2048, with 4K VLAN IDs
32K
128 (static or DHCP)
8K