Lenovo RackSwitch G8264 Installation Manual page 43

© Copyright 2015 Lenovo
4. Use the M6 washers and screws to mount the switch into the rack. Torque the
screws to approximately 5.7 Nm +/- 0.1 Nm (50 inch-pounds).
3
5. Slide the switch into the rack.
6. Use the M6 washers, screws, and clip nuts to attach the alignment plate.
Torque the screws to approximately 5.7 Nm +/- 0.1 Nm (50 inch-pounds).
3
7. If installing the 1U air duct option, see the instruction on
8. Connect all external cables in accordance with the
page 34.
9. Initialize the switch. See
10. If the switch is a replacement unit, set Vital Product Data (see
Product Data" on page
4
2
4
2
Chapter 5, "Initializing the
67).
Chapter 3: Installing G8264 Hardware and Options
8
10
page 44.
"Cabling Guidelines" on
G8264," on page 69.
"Configuring Vital
43