Power Supply - Lenovo RackSwitch G8264 Installation Manual

Power Supply

Statement 5
© Copyright Lenovo 2017
The rear panel of the G8264 has two bays for hot‐swap power supply modules. Each
power supply module has an individual IEC 320 C14 power connector. The power
cord attaches to a universal grounded AC power source.
Compatible power options are listed in the Lenovo Networking Catalog.
CAUTION:
The power control button on the device and the power switch on the power
supply do not turn off the electrical current supplied to the device. The device
also might have more than one power cord. To remove all electrical current from
the device, ensure that all power cords are disconnected from the power source.
Chapter 2: Switch Components
27