Dell Latitude E5570 Owner's Manual page 24

Installing the dock frame
1. Place the dock frame on the computer and tighten the screws.
2. Connect the eDP cable.
3. Place the metal bracket and tighten the screw.
4. Connect the keyboard cable.
5. Place the SSD plate and tighten the screw to secure it.
NOTE: This step is required only if the PCIe SSD card is removed.
6. Tighten the screws to secure the dock frame to the computer.
7. Install the:
a. WWAN card
b. WLAN card
c. hard drive assembly
d. battery
e. base cover
8. Follow the procedure in
Removing the optional SmartCard reader board
1. Follow the procedure in
2. Remove the:
a. base cover
b. battery
c. hard drive assembly
d. dock frame
24
or M.2 SSD or PCIe SSD
After working inside your
Before working inside your
or M.2 SSD or PCIe SSD
system.
computer.