Table of Contents
Advertisement
e. Install and adjust Hinge Top L on the top table,
screw three screws that are fixation of it to use a
torque wrench.
(Torque of screw: 6 ± 2 N
CAUTION
• Fix Hinge Top L securely by three screws for fixa-
tion. In case of not enough fixation, it might
become cause of an accident of dropping the
Door A'ssy PC.
• Three screws of Hinge Top L are screwed to use a
torque wrench.
4. Install Cover Hinge Top L
a. Connect the connector of Door A'ssy PC, fix the
connector into storage part.
CAUTION
• The wire harness is arranged not to touch Hinge
Top L, not to bend it.
•
m)
b. Open Door A'ssy PC, put Cover Hinge Top L on
this side of the Hinge Top L.
c. Insert hooks (2 portions) of out side to under
Hinge Top L, and hook the hooks of inside. (Do
not forcibly press Cover Hinge Top L. Because it
might cause of damage of hooks.)
d. Screw the screws that are fixation of Cover Hinge
Top L.
e. Install Button Plate Control.
5. Make the connector of Door A'ssy PC waterproof
• Tighten Bag Joint that is put in the connector of
upper and right side of Door A'ssy PC by Cable Tie.
6. Install Cover Cap Door PCT R and Cover Table R
a. Three screws that were removed before (see
11.8.1.3.C) are screwed on the holes of screws
that are fixation of Hinge Top R.
b. Install Cover Table R in Hooks of Top Table.
c. Store the connector of right side of Door A'ssy PC
in Cover Cap Door PCT R.
d. Store Bag Joint in Cover Cap Door PCT R, put and
install hook of Cover Cap Door PCT R into Door
A'ssy PC.
e. Screw Cover Cap Door PCT R.
48
Advertisement
Table of Contents
