Table of Contents
Advertisement
NC1500C
Remove the top rear cover.
[4]
1.3.2
Top cover mounting procedure
Place the top rear cover of
[1]
the projector once on the
top of the projector.
Place it at a position where the cables
from rear status indicators can be
connected.
Connect the cables for rear
[2]
status indicator.
Before mounting the top rear cover, it is
necessary to connect the cables.
<1>
Pass the cables through the
clamp of the projector.
<2>
Connect the cables to the
Mount the top rear cover.
[3]
Close the hexagonal fasteners (2 places)
at the top and remove the cover.
Mount the top front cover.
[4]
Close the hexagonal fasteners (4 places)
at the top and lock them with the
exclusive key.
D-14
connector of the board
(Connector name: POSTA).
1. Before Setting Up Your Projector
POSTA
Advertisement
Table of Contents
