Top Rear Cover Removal Procedure - NEC NC1500c Installation Manual

NC1500C
1.3.1

Top rear cover removal procedure

Remove the top front cover
[1]
of the projector.
To remove the top front cover, an
exclusive key is required.
Cancel the locking with the exclusive key
and remove the hexagonal fasteners (at 4
places) at the top to remove the cover.
Open the top rear cover of
[2]
the projector and place it
on the top of the projector
once.
Remove the hexagonal fasteners (2
places) on the top.
Remove the cables for rear
[3]
status indicator.
To the top rear cover, the cables from
rear status indicators are connected (2
places). Before removing the cover,
remove the cables as follows:
<1> Remove the cables from the board
(Connector name: POSTA).
<2> Lift up the cover for about 5 cm.
<3> Remove the cables from the clamp
in front of you.
1. Before Setting Up Your Projector
POSTA
D-13