Storing Items In The Phonebook; Sending A Fax Using Phonebook - Panasonic KX-MB1500C Operating Instructions Manual

6. Fax (KX-MB1520 only)
#402 is activated (page 50). For an explanation of the
messages, see page 59.
6.2 Storing items in the
phonebook
The unit contains a phonebook (100 items).
R Make sure that the MFaxN light is ON.
MFaxN
6.2.1 Storing phonebook items
1
Press MMenuN repeatedly to display "PHONEBOOK
SET". A MEN
2
Enter the name, up to 16 characters (see page 57
for character entry). A MSetN
3
Enter the telephone number, up to 32 digits. A
MSetN
R To program other items, repeat steps 2 to 3.
4
MMenuN
Note:
R A hyphen or a space entered in a telephone number
counts as 2 digits.
6.2.2 Editing a stored item
1
Press MEN.
2
Press MCN or MDN repeatedly to display the desired
item. A MMenuN A MGN
3
Edit the name if necessary. A MSetN
4
Edit the telephone number if necessary. A MSetN
A MStopN
6.2.3 Erasing a stored item
1
Press MEN.
2
Press MCN or MDN repeatedly to display the desired
item. A MMenuN A MBN
R To cancel erasing, press MStopN.
3
MSetN A MStopN
36
MStopN MMenuN
MSetN MCNMDNMEN
6.3 Sending a fax using
phonebook
Before using this feature, store the desired names and
telephone numbers into the phonebook (page 36).
R Make sure that the MFaxN light is ON.
1
Set the original (page 18).
2
If necessary, change the contrast (page 35) and the
resolution (page 35).
3
Press MEN, then press MCN or MDN repeatedly to
display the desired item.
4
Press MStartN to scan the document into memory.
Wait until "SCAN:PRESS SET" "SEND:PRESS
START" is displayed.
R To send a single page, go to step 6.
R To send multiple pages, go to the next step.
5
Place the next page. A MSetN
R To send more pages, repeat this step.
6
MStartN
To search for a name by initial
Example: "LISA"
1. Press MEN.
2. Press MCN or MDN to initiate the phonebook.
3. Press M5N repeatedly to display any name with the
initial "L" (see page 57 for character entry).
R To search for symbols, press MGN.
4. Press MCN or MDN repeatedly to display "LISA".
R To stop the search, press MStopN.
Fax auto redial
If the line is busy or if there is no answer, the unit will
automatically redial the number 1 time.
Note:
R To stop sending, see page 58.