Table of Contents
Advertisement
2.5 Date and time (KX-MB1520
only)
We recommend setting the date and time. The other
party will receive your unit's date and time as the header
information.
MFaxN
1
MMenuN A MBNM1NM0NM1N A MSetN
2
Enter the current month/date/year by selecting 2
digits for each.
Example: August 3, 2011
M0NM8N M0NM3N M1NM1N
3
Enter the current hour/minute by selecting 2 digits for
each.
Example: 10:15 PM (12 hour clock format)
1. M1NM0N M1NM5N
2. Press MGN repeatedly to select "PM".
4
MSetN
5
Press MMenuN to exit.
Note:
R To check the current date and time setting,
temporarily change the unit to the fax mode by
pressing MFaxN repeatedly (page 17).
R Your unit's date and time will be used as the header
information for the following:
– When sending faxes (page 35).
R If the date and time is not set correctly, the other party
will receive an incorrect date and time as their
header. This may confuse the other party.
R The accuracy of the clock is approximately ±60
seconds a month.
R If you select French for the language (feature #110
on page 46), the time is set using a 24 hour clock.
Example: 15:15
Press M1NM5N M1NM5N.
To correct a mistake
Press MFN or MEN to move the cursor to the incorrect
number, and make the correction.
If you have subscribed to a Call Display service
The date and time will be automatically set according to
the received caller information.
MMenuN
MSetN MFNMEN
R If the time has not previously been set, Call Display
will not adjust the clock.
R You can turn this feature OFF (feature #226 on
page 48).
2. Preparation
19
Advertisement
Table of Contents
