Samsung BACnet MIM-B17N User Manual page 32

Note Controlling or monitoring cooling/heating discharge
temperature setting is available only when the
DMS2 is directly connected to the Interface module
MIM-B13D. However, when the DMS2 is connected
to a centralized controller, controlling or monitoring
cooling/heating discharge temperature setting is
not available.
Refer to the 'Controlling an indoor unit' for Fresh
duct control. (Refer to page 20~23)
The fan speed of a Fresh duct is fixed as 'High' .
Setting air flow direction of a Fresh duct is not
available.
Refer to the 'Indoor unit operation mode limit' for
Fresh duct operation mode limit.
(Refer to page 24~25)
31
E-