Samsung OfficeServ 100 Series User Manual page 64

- To show Caller ID Number dial 1.
- To show Caller ID Name dial 2.
- To show the DID Number the call came in on dial 3.
- To show the Name of the DID the call came in on dial 4.
- To show the Name of the Group the call came in for dial 5.
- To show the DID Number and then Name of the DID dial 6.
- To show the Name of the DID and then the DID Number dial 7.
• To set the top line of the display shown after answering a call dial 2.
Set the data to display from the following:
- To show Caller ID Number dial 0.
- To show Caller ID Name dial 1.
- To show the DID Number the call came in on dial 2.
- To show the Name of the DID the call came in on dial 3.
- To show Caller ID Number and then the DID Number dial 4.
- To show Caller ID Name and then the DID Number dial 5.
- To show the DID Number and then the name of the DID dial 6.
- To show the Name of the DID and then the DID Number dial 7.
- To show the C.O. line information dial 8.
• To set the format if the C.O. line information when the above is set to show C.O.
line information dial 3.
- To show the C.O. line number and the dialed or Caller ID Number dial 0.
- To show only the dialed or Caller ID Number dial 1.
• Press TRANSFER to exit and store your selection.
VIEWING THE NEXT CALLER ID CALL
In the event that you have a call waiting or a camped-on call at your keyset, you
can press the NEXT key to display the Caller ID information associated with the
call in queue at your keyset. Either the CID name or CID number will show in the
display depending on your Name/Number selection.
To view Caller ID information for calls that have been camped-on to your keyset,
press the NEXT key. If your keyset does not have a NEXT key, press the CID key
and then the NEXT soft key.
SAVING THE CALLER ID NUMBER
At any time during an incoming call that provides CID information, you may press
the SAVE key to save the CID number. If your keyset does not have a SAVE key,
press the CID key, the SCROLL key and then the SAVE soft key. The system must
be using LCR to dial the saved number.
57