Outside Calls; Making An Outside Call; Answering An Outside Call; Universal Answer - Samsung OfficeServ 100 Series User Manual

Idcs keyset
Hide thumbs Also See for OfficeServ 100 Series:
Table of Contents

Advertisement

MAKING AN OUTSIDE CALL

Lift the handset and press an idle outside line button, line group button or dial
a line access code to receive dial tone—OR—press an idle outside line button,
line group button or dial a line access code to receive dial tone through the
speaker—OR—press SPEAKER, receive intercom dial tone and dial a line
access code.
Dial the telephone number.
Finish the call by replacing the handset or pressing the ANS/RLS key.
NOTE: You will receive No More Calls tone when you attempt to make a call and
there is no key available for that line.
If Least Cost Routing is enabled on your phone system, this button may be
labeled LCR or accessed by dialing an access code (usually 9).
If your system is programmed to require an authorization code before making
a call, dial , plus a valid code before selecting a C.O. line.
If your system is programmed to require an account code before making a
call, press the ACC button or dial 47 plus a valid bin number, press the ACC
button again, or ,, and then select a C.O. line. See Account Codes for more infor-
mation.
For more information on authorization and account codes, see your system
administrator.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER key before dialing.

ANSWERING AN OUTSIDE CALL

Lift the handset and you are automatically connected to the ringing call.
See Ring Preference under Customizing Your Keyset—OR—press the ANS/RLS
key to automatically answer on the speakerphone.
NOTE: If a call is flashing at your keyset but not ringing, you must press the flash-
ing button to answer.

UNIVERSAL ANSWER

Outside lines may be programmed to ring a general alerting device. To answer
calls ringing this device, dial 67 or press the UA key.This device can operate in any
one of the six different ring plans.
NOTE: If the Hot Keypad feature has been turned off, you must first lift the handset
or press the SPEAKER key before dialing.
14

OUTSIDE CALLS

Advertisement

Table of Contents
loading

This manual is also suitable for:

Officeserv 500 seriesOfficeserv 7000 series

Table of Contents