Table of Contents
Advertisement
■ Zoom Caption Pos.
Signal > Zoom Caption Pos.
Lets you adjust the vertical position of the image so that subtitles are visible (available
only if the aspect ratio has been set to
using this function.
Screen Options
■ Messages
Settings > Display > Messages
Turn this setting off if you want to prevent on-screen messages from appearing (such as
the no-signal message, or the identifying text that appears when you switch between
image sources or color modes).
■ Startup Screen
Settings > Display > Startup Screen
Turn this setting off if you want to prevent the startup screen from appearing while the
projector is warming up.
■ Display Background
Settings > Display > Display Background
Changes the screen that's used when the projector is not receiving a signal or when you
press the
button to temporarily stop projection.
Blank
■ Standby Confirmation
Settings > Display > Standby Confirmation
Sets whether a confirmation message is displayed when you press the P
on the remote control to turn off the projector.
Other Setup Options
■ Projection
Settings > Projection
You can select different options for projecting the image:
.
Rear/Ceiling
). Make sure
Zoom
Overscan
Front
is set to
before
Off
button
Standby
,
,
Front/Ceiling
Rear
Making Detailed Adjustments
,
43
Advertisement
Table of Contents
