Adjustments For Computer Images - Epson PowerLite Home Cinema 21000 User Manual

■ RGBCMY
Image > Advanced > RGBCMY
Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 27).
Use the RGBCMY settings to adjust the hue, saturation, and brightness of the six color
components (red, green, blue, cyan, magenta, yellow). After adjusting each color, press
to move to another menu option. You can also access this setting by pressing the
Esc
RGBCMY
■ Gamma
Image > Advanced > Gamma
Note: This setting cannot be used when the Color Mode is set to x.v.Color (see page 27).
You can select from five gamma settings (2.0 to 2.4) or customize your own setting from
your image or a displayed graph. Lower values will increase the contrast of dark areas, but
tend to blur the bright areas. Higher values will darken the light areas.
■ Super-resolution
Signal > Super-resolution
Can be used for upscaled video, to sharpen the image and enhance apparent detail. You
can select from 3 levels of enhancement. Note that intentionally blurred parts of the
image, such as out-of-focus backgrounds, may become sharper. You can also access this
setting by pressing the

Adjustments for Computer Images

In addition to the settings described previously, you can adjust the Tracking and Sync settings
for analog RGB computer images. Normally, these settings are adjusted automatically by the
projector. If you notice that the image is blurry or contains dark vertical bands, you may need
to adjust the settings yourself.
38
Making Detailed Adjustments
button on the remote control. See page 29 for more information.
Super-res
button on the remote control.