Sharpness And Picture Quality Settings - Epson PowerLite Home Cinema 21000 User Manual

■ Setup Level
Signal > Advanced > Setup Level
Note: This setting can be used only when an NTSC signal is being input through the Video or
S-Video port, or when a video signal is being input through the Component video ports.
This setting adjusts the threshold at which dark areas of the image are rendered black
(0 IRE). For compatibility with most DVD and video equipment sold in North America,
leave this setting at 0%. Check your video equipment's specifications to be sure of the
correct setting.
■ EPSON Super White
Signal > Advanced > EPSON Super White
Note: This setting can be used only when a signal is being input through the HDMI1 or HDMI2
port and the Color Mode is set to THX or Cinema (see page 27).
If bright parts of the image are washed out or overexposed (when the input signal
contains values over 100 IRE), turn this setting on to compensate.
■ HDMI Video Range
Signal > Advanced > HDMI Video Range
Note: This setting can be used only when EPSON Super White is turned off and a signal is
being input through the HDMI 1 or HDMI 2 port.
If your video equipment has an HDMI port and you've connected it to the projector
using an HDMI cable, set the level of the projector to match that of the video equipment.
■ Power Consumption
Image > Power Consumption
This setting controls the light output from the projector. On
produces a brighter image and the lamp uses more power. To save power, extend the life
of the lamp, and reduce fan noise, select

Sharpness and Picture Quality Settings

If the image looks fuzzy, or if it contains noise or flickering, you can use these settings to
correct it.
34
Making Detailed Adjustments
Normal
.
ECO
, the projector