Hotline - NEC DS1000 Quick Setup Manual

Hide thumbs Also See for DS1000:
Table of Contents

Advertisement

4.
Enter the number of the Programmable Function Key you want to assign as a Group Call Pickup Key
(1-24, depending on keyset type) +
1701:STA:nnn KEY:nn
nnnnnnnn
5.
For the key selected, assign it as a Group Call Pickup Key (
11
=delay ring), then enter the Pickup Group number (1-8) +
6.
Press
Press
Pres
Feature Quick Steps
To answer a call ringing a phone in your Pickup Group:
1.
Lift handset + Press flashing Group Call Pickup Key or dial *#.

Hotline

Hotline provides partner extensions with one-button calling and Transfer.
Hotline gives a keyset user with a programmed Hotline key one-button calling and Transfer to another
extension (the Hotline partner). Hotline helps co-workers that work closely together. The Hotline partners
can call or Transfer calls to each other just by pressing their Hotline key. By default, an extension has no
Hotline keys assigned. The Hotline key shows the status of the partner's extension:
Programming
Part II: Assign Hotline Keys to Extensions:
1.
Enter the programming mode. You see:
USER: nnn
ENTER PROGRAM?
2.
Enter
1701:KEY PROGRAMMING
STATION #?nnn
3.
Enter the number of the keyset extension (e.g., 300) you want to program +
1701:STA:nnn
KEY NUMBER?n
4.
Enter the number of the Programmable Function Key you want to assign as a Hotline Key (1-24,
depending on keyset type) +
1701:STA:nnn KEY:nn
nnnnnnnn
5.
For the key selected, assign it as a Hotline Key (
+
HOLD
DS1000/2000 Quick Setup Guide
CONF
to go back to step 4 and select another key to program.
OR
CONF
twice to go back to step 3 and select another extension to program.
OR
CONF
three times to exit program 1701.
Hotline Busy Lamp Indications
When the key is:
Off
On
Flashing fast
1701
+
HOLD
. You see:
HOLD
.
Section 2: Customizing Features
HOLD
. You see:
09
=immediate ring,
HOLD
The covered extension is:
Idle or not installed
Busy or ringing
In Do Not Disturb
. You see:
05
), then enter the Hotline partner's extension number
Section 2: Customizing Features
10
=lamp only,
.
HOLD
. You see:
2
2-19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ds2000

Table of Contents