NEC DS1000 Quick Setup Manual page 33

Hide thumbs Also See for DS1000:
Table of Contents

Advertisement

2.
Enter
1801:EXTENSION PROG
STATION?nnn
3.
Enter the 34-button keyset extension you want to program (e.g., 300) +
1801:STA:nnn
PT TYPE?nn nnnnnnnnn
4.
Press
1801:STA:nnn
DSS TYPE?nnnn
5.
Enter the type of DSS Console attached to the extension you selected in step 3 above (1=24-button,
2=110-button) +
1801:STA:nnn
DSS BLOCK NUM?n
6.
Enter the number of the DSS Block (1-4) you want to assign to the DSS Console attached to the exten-
sion you are programming +
7.
Press
Press
Part II: Program the DSS Console Keys.
1.
Enter the programming mode. You see:
USER: nnn
ENTER PROGRAM?
2.
Enter
1704:DSS KEY PROG
DSS BLOCK NUM?
3.
Enter the number of the DSS Console block you want to program (see Part I) +
1704:DSS KEY PROG
DSS KEY:n
4.
Enter the number of the DSS Console key you want to program (1-110) +
DSS BLOCK:n KEY:n
nnnnnnnnnnnn
5.
For the key selected, enter the code for the feature you want to assign plus any additional data (see the
chart below) +
For more on the features listed, refer to the Software Manual on the System Document CD.
DS1000/2000 Quick Setup Guide
1801
+
HOLD
. You see:
Vol Up
until you see:
Vol Up
. You see:
HOLD
Normally, the first console you install has block 1, the second has block 2, etc.
CONF
to go back to step 3 and select another extension to program.
OR
CONF
twice to exit program 1801.
1704
+
HOLD
. You see:
The previously programmed assignment for the selected key displays.
Vol Up
.
You can optionally press ICM + Vol Up to scroll through the available DSS Console key options.
Feature
Undefined (blank) Key
Line Key
Park Orbit Key
Hotline Key
Call Coverage Immediate Ring
Call Coverage No Ring (lamp only)
Call Coverage Delay Ring
Group Pickup Immediate Ring
Section 2: Customizing Features
.
05
+ Hotline Partner's Extension (e.g., 304)
+ Covered Extension (e.g., 304)
06
07
+ Covered Extension (e.g., 304)
08
+ Covered Extension (e.g., 304)
Section 2: Customizing Features
HOLD
. You see:
HOLD
. You see:
HOLD
. You see:
Key Code
00
03
+ Line number (e.g., 1)
04
+ Park Orbit (60-69)
09
+ Pickup Group (1-16)
2
2-11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ds2000

Table of Contents