Table of Contents
Advertisement
1
Specifications > Specifications > Basic Specification(Direct Print PDF)
Basic Specification(Direct Print PDF)
Specification/Functions
Indispensable option
Direct Print Kit-H1
Indispensable Environment
Memory A : 1.5GB
Correspondence PDF
PDF Ver 1.7*
Paper handling
Printing area
Horizontal scanning line : Parts except blank of 4.0mm
Vertical scanning line :
Parts except blank of
Top:4.0mm
Bottom:4.0mm
Paper size
It is the same as the main body specification.
Paper type
It is the same as the main body specification.
Number of copies
1 - 9999
Finisher
None*, Collating, Rotate Collating, Rotate Grouping, Offset
Collating, Offset Grouping, and
Staple Sort
Staple position
Corner (Upper-Left)*, Double (Top), Corner (Upper-Right),
Double (Right), Corner (Lower-Right), Double (Bottom), Corner
(Lower-Left), and Double (Left)
Hole punch
Two holes, three holes, and four holes(This setting is decied at
the shipment according to the countries.)
Available printing area:
Direct Print of PDF file:
The inside area of 4.0 mm from the lead edge, 4.0 mm from the trail edge, and 4.0 mm each
from both sides
0 mm mode can be supported.
Direct Print of TIFF / JPEG:
The inside area of 5.0 mm from the edges
If [Enlarge Printing area] is set to on, all margins become 0mm so that the available printing
area is extended to the whole area of paper.
If the aspect ratio of image is same as that of the specified paper size, the image can be
printed without margins around the image.
No print is made, however, on the outside of the available printing area set in the copier: the
inside of 4.5 mm from the lead edge, 2.0 mm from the trail edge, and 2.5 mm each from both
sides.
*Corresponding to PDF Ver1.7. Except the page size of PDF getting over 200 inches and the
file size of PDF getting over 2GB.
1
Specifications > Specifications > Basic Specification(Direct Print PDF)
Content
T-1-10
1-7
1-7
Advertisement
Table of Contents
